Tagged: mcu

0

Bootloader for the PIC18F27J53

  In the previous article I described the development board for the pic18f27j53 that I designed and built. In this article I describe how to modify the Microchip HID bootloader  for the board. First...

4

Temperature sensor and real time clock for Arduino

  This simple board has been developed to work together with an arduino board, but it can be used in conjunction with every other boards with an I2C bus and a power suplly into...

The Zigbee revealed – 1 Introduction 0

The Zigbee revealed – 1 Introduction

This is the first article of a short serie about the zig bee: from the wikipedia (http://en.wikipedia.org/wiki/ZigBee): ZigBee is a specification for a suite of high level communication protocols using small, low-power digital radios...

Piccoletta: a USB developer board for PIC’s – Layout and application scheme 2

Piccoletta: a USB developer board for PIC’s – Layout and application scheme

INTERFACE LAYOUT – top side The top side of the board is shown in the next picture: You can see three Jumpers: Power supply selection Boot loader selection ICSP programming interface Last, you can...